Latest Samsung Galaxy Note10 Lite UFS ISP Pinout | Remove FRP/Pattern/Password - MobileFlasherBD.Com

Post Top Ad

Post Top Ad

22/02/2021

Latest Samsung Galaxy Note10 Lite UFS ISP Pinout | Remove FRP/Pattern/Password

Also Read

Latest Samsung Galaxy Note10 Lite UFS ISP Pinout | Remove FRP/Pattern/Password. Samsung Galaxy Note10 Lite Repair Dead boot, Flashing, remove FRP lock or any brand phone you need EasyJTAG Plus it is the only box in the market which support the UFS chip. those boxes help some phones after flashing the wrong firmware not

Samsung Galaxy Note10 Lite UFS ISP Pinout  Remove FRPPatternPassword


Samsung Galaxy Note10 Lite SM-N770F UFS ISP Pinout Image
Hardware Process:
You need to take the rear case away from your phone. Next, unplug the motherboard from the existing battery, fingerprint sensor, and camera.
Unscrew the screws from the motherboard and take it out and put it in a safe place.
On your motherboard, locate the six eMMC pins. The pins are TxOp, TxOn, RxOp, RxOn. You will require to cut through the steel cover to reveal them.
Bring the UFI box and take the adapter out from it. You will see the exact same pins in the adapter I have mentioned in the previous step.
Solder the 4 pins: TxOp, TxOn, RxOp, RxOn with jumpers between the motherboard and the adapter. Left the VCC and VCCQ for the USB to power them out.
Put the adapter inside the UFI box. Connect the box to the computer.
Connect the motherboard to the phone’s battery. Then, put the USB cable on the phone and connect it to the computer.

Samsung Galaxy Note10 Lite FRP Lock Using EasyJTAG Plus:
Remove the back panel of the device and connect the wire to the UFS ISP Pinout.
Next, connect the correct UFS ISP Pinout to the EasyJTAG Plus box
Check the “Main UFS” tab
Then Click on Connect EasyJtag UFS.
Go to Tool Tab And select Oppo Password Reset.
Done

Post Top Ad