Jumper WaysTestPoint-UFS-EDL-Image

How To Solution Samsung Galaxy J2 Core J260 Backlight Ways, Repair Display Light Problem

SAMSUNGSamsung Galaxy J2 Core J260 Backlight Ways, Repair Display Light ProblemBy Mobile Rdx Last updated Aug 15, 2022 0 ShareFacebookTwitterIn this post we will provide solutions to repair the damage Samsung Galaxy J2 Core J260 Backlight Ways Problem, LCD Display Light Ways If you get a case with the display problem on the phone display or the light on the screen does not work properly. It may be possible to damage the LCD display of Samsung Galaxy J2 Core SM-J260F/G. You can put it by trying to replace it with LCD which condition is good. But if the Samsung Galaxy M12 screen is flashing or low light or there is absolutely no backlight.Samsung Galaxy J2 Core J260 problem of no backlight is often symptomatic like an LCD that has no display, the LCD screen becomes white. Or in general, there is no light produced by the LCD screen but the ringing and notification sound can still be heard.Samsung Galaxy J2 Core J260 Device OverviewThe smartphone will be available in three color options, Black, Gold, and Blue. The Samsung Galaxy J2 Core (2020) comes with a screen with a modern aspect ratio.

The Samsung Galaxy J2 Core is controlled by an Exynos 7570 Quad-core processor and Mali-T720 GPU. It will be upheld by 1 GB of RAM and 16 GB of internal storage capacity. Which can be additionally extended through microSDXC (dedicated slot). It has Android 8.1 Oreo (Go edition).

The smartphone will be supported by a Li-Ion 2600 mAh battery that is removable. For the camera, the Galaxy J2 Core (2020) comes with an 8 MP rear camera with an f/2.2 gap alongside LED. For the front, there will be a 5 MP shooter.

How To Solution Samsung Galaxy J2 Core J260 Backlight Ways, Repair Display Light Problem

Samsung Galaxy J2 Core J260 Backlight problems that you might encounter:White DisplayNo DisplayLines on DisplayLow Light on DisplayNo BacklightIf Samsung Galaxy J2 Core J260 phone you have had one of the symptoms described above. Then can be done some repair steps that can overcome the damage.1. Change or Replace ScreenThe first thing to do if experiencing such damage is to try replacing the new LCD part with a good condition. This can be applied if your phone has a burst or crack on the screen from falling firmly. By trying to replace the new LCD, hopefully, this damaging problem can be solved.2. Check the line and the Display socketRealme C11 No backlight damage to a phone can be caused by the fluid that enters the phone. And damages the line and the Display socket on the Motherboard. So to fix it, it is recommended to uninstall all parts of the phone in order to perform the check. Usually, water will corrode and rust on the track and socket and impact the breaking path. So for the step repair immediately clean the corrosion and rust, if there is a path that broke immediately repair with the path jumper method.3. Check and replace internal componentsIf the condition of the LCD and the line is in good condition, but suddenly there is backlight damage on your phone. Then it can certainly occur problems in the internal components. The diagram image that Mobilintec Team provides can be a guide for you in trying to fix the backlight damage. Perform measurements on each component, if there is a defective component then immediately turn with components of the same type and value. Try to check the components of the diode as well as the coil that has been marked on the diagram image. Often the component is damaged and results in the appearance of the backlight display.

Related Articles

Leave a Reply

Your email address will not be published.

Adblock Detected

Please consider supporting us by disabling your ad blocker